Availability: | |
---|---|
YT24 Pneumatic Portable Drilling Machine/ Air Leg Rock Drill
Moderate
YT24 Air-leg Rock Drill
The rock drill is a kind of high efficiency air leg rock drill machine.It is widely used for blasting holes and other drilling projects in a quarries, railway construction, water conservancy construction and defence project facility.
To ensure the well lubricating.This rock drill may match FY200B oil reservior .
二、specification
Weight | ≈ 24 kg |
Length | 678mm |
Cylinder dia | 70mm |
Piston stroke | 70mm |
Air pressure | 0.4—0.63MPa |
Impact frequencey | ≥ 31Hz |
Air consumption | ≤66.7 L/S |
Air pipe (inner dia) | 19mm |
Water pipe | 13mm |
Shank head dia | 34-42mm |
Shank dimensions(hex×length) | 22×108 mm±1mm |
YT24 Rock Drill Air leg is suitable for drilling of horizontal or inclined holes on the medium-hard and hard rock. When it's matched with air leg Model FT100, it can blast holes from different directions and angles.
Blast hole diameter is between 36mm and 42mm. with an efficient depth from 1.5m to 2m.
It's recommended to be matched with Model w3.5/5 ,w3.2/7 , w3.0/5 air compressor which is powered by diesel engine. Other suitable air compressors can also be matched with this rock drill.
YT24 Air-leg Rock Drill
The rock drill is a kind of high efficiency air leg rock drill machine.It is widely used for blasting holes and other drilling projects in a quarries, railway construction, water conservancy construction and defence project facility.
To ensure the well lubricating.This rock drill may match FY200B oil reservior .
二、specification
Weight | ≈ 24 kg |
Length | 678mm |
Cylinder dia | 70mm |
Piston stroke | 70mm |
Air pressure | 0.4—0.63MPa |
Impact frequencey | ≥ 31Hz |
Air consumption | ≤66.7 L/S |
Air pipe (inner dia) | 19mm |
Water pipe | 13mm |
Shank head dia | 34-42mm |
Shank dimensions(hex×length) | 22×108 mm±1mm |
YT24 Rock Drill Air leg is suitable for drilling of horizontal or inclined holes on the medium-hard and hard rock. When it's matched with air leg Model FT100, it can blast holes from different directions and angles.
Blast hole diameter is between 36mm and 42mm. with an efficient depth from 1.5m to 2m.
It's recommended to be matched with Model w3.5/5 ,w3.2/7 , w3.0/5 air compressor which is powered by diesel engine. Other suitable air compressors can also be matched with this rock drill.